SE5001A Series
1-Port Industrial Serial Device Server, with Industrial EMC Protection supporting RS-232/RS-485/RS-422
- Industrial EMC protection
- Rugged metal case with wall or DIN-Rail mount
- 10/100Mbps Fast Ethernet full duplex auto negotiation
- TCP Server/Client, UDP, Virtual COM and Tunneling modes supported
- Remotely monitor, manage, and control industrial field devices
- Configuration via Web Browser / Serial Console / Telnet Console / Windows Utility
- Remote firmware upgrade
Product Description
| NETWORK INTERFACE | |
|---|---|
| Speed | IEEE 802.3 10BaseT IEEE 802.3u 100BaseT(X) |
| Auto MDI/MDI-X | Present |
| Connector ports | RJ45 x 1 |
| SERIAL INTERFACE | |
|---|---|
| Connector | D-Sub9 RS-232/422/485 software selectable (DB models) 5.08mm 5-Pin Terminal block RS-232/422/485 software selectable (TB models) |
| Ports | 1 |
| Baud Rate | 1,200bps ~ 230kbps software selectable |
| Data Bits | 7, 8 software selectable |
| Stop Bits | 1, 2 software selectable |
| Flow Control | None, Xon/Xoff, RTS/CTS |
| SOFTWARE | |
|---|---|
| Protocols | IPv4, ICMP, TCP, UDP, DHCP Client, SNMP, HTTP, Telnet, RFC2217 |
| Configuration | Atop Management Utility, Web UI, Telnet |
| VirtualCOM | Windows/Linux redirection software |
| Link Modes – TCP Client | Single destination or VirtualCOM |
| Link Modes – TCP Server | 4 Connections; VirtualCOM or reverse Telnet |
| Link Modes – UDP | Up to 4 Ranges IP |
| POWER | VALUE |
|---|---|
| Input Voltage | 9 – 48VDC |
| Input Current (@ 9VDC) | 0.30 A @ 9 VDC |
| Power Consumption | Approximately 2.70 W (Max) |
| Connector | 3-Pin 5.08mm Lockable Terminal Block |
| Reverse Polarity Protection | Yes |
| ENVIRONMENTAL LIMITS | |
|---|---|
| Operating Temperature | 0°C ~ 60°C ( 32º ~ 140ºF ) |
| Storage Temperature | -40°C~85°C (-40°F~185°F) |
| Ambient Relative Humidity | 5%~95%, 55°C (Non-condensing) |